| Field | Value |
|---|---|
Title |
NSW Marine LiDAR Topo-Bathy 2018 Geotif |
Alternative title(s) |
Coastal marine topographic and bathymetric surveys and imagery |
Abstract |
Remotely sensed topographic (elevation) and bathymetric (depth) information were acquired for the NSW coast (Point Danger to Cape Howe) and southern Queensland (Palm Beach to Point Danger) using Airborne LiDAR Bathymetry (ALB - a combination of Light Detection And Ranging (LiDAR) and Laser Airborne Depth Sounding (LADS) sensors) during July – December 2018. Data were acquired by Fugro Pty Ltd on behalf of NSW Office of Environment and Heritage using a Riegl VQ-820-G ALB (LiDAR) and Fugro LADS High-Definition sensors aboard sub-contracted Corporate Air Cessna C441 (VH-VEH). Funding was provided through the NSW Coastal Reforms package. The objective of the project was to provide high-resolution data better than 3-5 m spaced soundings (0.5 m spot spacing terrestrial; 3.4 m spot spacing marine) from the mean high-water mark to ~200m inland, and from the shore, seaward (LADS - bathymetry) to the point of laser extinction (~20-40m water depth depending on in-water conditions). Positioning data were collected on the ellipsoid ITRF 2014 GRS80 in UTM Z56 and post-processed using local base stations (CORSnet NSW) to provide a Post Processed Kinematic GNSS solution for final aircraft trajectory before being applied to all data. The final data Geotif products are provided on the Geosciences Australia ELVIS website .They are combined gridded terrestrial (elevation) and subtidal marine (bathymetry) data at 5 x 5 m (horizontal resolution) Geotifs exported using ESRI ArcMap from rasters (weighted average of clean soundings) in GDA 2020 (horizontal datum) to Australian Height Datum (vertical datum) and vertical precision to International Hydrographic Order (IHO) 1B. Data covers an area of 6862 km2 provided in 48 sub-datasets the extents of which are generally defined in their alongshore extent by the boundaries of NSW Secondary Sediment Compartments (Geosciences Australia). Other data outputs will include raw and classified LAS format files, aerial imagery and raw seabed reflectance data to be made available shortly on the ELVIS website. Data packages containing Arc Grids (topo-bathy, contours), XYZ, KMZ, tif, pdf maps and Fledermaus SD files will be made publicly available via the AODN (Australian Ocean Data network). Metadata, data quality statements and a geographical data coverage ArcGIS shapefile are available via SEED. The data are intended to inform coastal and marine management and should not be used for navigation without additional processing. |
Resource locator |
|
Data Quality Statement |
Name: Data Quality Statement Protocol: WWW:DOWNLOAD-1.0-http--download Description: Data quality statement for Marine LiDAR Function: download |
Download Package |
Name: Download Package Protocol: WWW:DOWNLOAD-1.0-http--download Description: Zipped folder including an ArcGIS shapefile of the spatial extent of the NSW Marine LiDAR Topo-Bathy 2018 Dataset (including Geotif extents) Function: download |
REST Service |
Name: REST Service Protocol: WWW:DOWNLOAD-1.0-http--download Description: NSW Marine LiDAR Topo-Bathy 2018 Geotif - REST Function: download |
Unique resource identifier |
|
Code |
45089194-912d-4ecf-8200-969e0796afee |
Presentation form |
multimediaDigital |
Edition |
v1.1 |
Dataset language |
eng |
Metadata standard |
|
Name |
ANZLIC Metadata Profile: An Australian/New Zealand Profile of AS/NZS ISO 19115:2005, Geographic information - Metadata |
Version |
1.1 |
Dataset URI |
https://datasets.seed.nsw.gov.au/dataset/45089194-912d-4ecf-8200-969e0796afee |
Purpose |
Baseline data for coastal hazard management by state and local governments for Coastal Reforms. The data are intended to inform coastal and marine management including modelling of coastal and marine processes. The data should not be used for navigation without additional processing. |
Status |
completed |
Spatial representation type |
grid |
Spatial reference system |
|
Authority code |
GDA94 / MGAZone 56 |
Code identifying the spatial reference system |
28356 |
Spatial resolution |
5 m |
Additional information source |
Extent along Australia's east coast if from Palm Beach in southeast Queensland to Cape Howe at the NSW/Victorian border from a minimum of 200m inland from the shore to point of LADS extinction (nominally 20-40m water depth) offshore. |
| Field | Value |
|---|---|
Topic category |
|
| Field | Value |
|---|---|
Keyword set |
|
keyword value |
GEOSCIENCES-Geomorphology MARINE-Coasts MARINE-Geology-and-Geophysics MARINE-Reefs LAND-Topography PHOTOGRAPHY-AND-IMAGERY-Remote-Sensing |
Originating controlled vocabulary |
|
Title |
ANZLIC Search Words |
Reference date |
2008-05-16 |
Geographic location |
|
West bounding longitude |
149.414062 |
East bounding longitude |
154.423828 |
North bounding latitude |
-37.801968 |
South bounding latitude |
-27.465385 |
NSW Place Name |
NSW coast |
Vertical extent information |
|
Minimum value |
-100 |
Maximum value |
2228 |
Coordinate reference system |
|
Authority code |
urn:ogc:def:cs:EPSG:: |
Code identifying the coordinate reference system |
5711 |
Temporal extent |
|
Begin position |
2018-07-01 |
End position |
N/A |
Dataset reference date |
|
Date type |
publication |
Effective date |
2019-08-28 |
Resource maintenance |
|
Maintenance and update frequency |
None |
Contact info | |
Organisation name |
NSW Department of Climate Change, Energy, the Environment and Water |
Full postal address |
NSW Australia data.broker@environment.nsw.gov.au |
Telephone number |
131555 |
Email address |
|
Responsible party role |
pointOfContact |
| Field | Value |
|---|---|
Lineage |
Generally, the 2019 dataset is a ‘one-off’ collection but future collections may be added a later date, funding permitting. Some earlier LiDAR/LADS surveys collected 2008 and 2011 are also to be provided. Additional details on the systems, aircraft, specifications of sensors used, auxiliary data, processing, classification etc are provided in Report of Survey and associated reports. The final Report of Survey can be accessed via the OEH Offshore Mapping webpage and/or OEH IAR, ELVIS or AusSeabed websites or upon request. System installation occurred at Goulburn airport 3-10 July 2018 followed by verification flights with surveys commencing from Ballina airport 11 July 2018. A total of 93 flights were conducted from 11 July 2018 to 20 October 2018 followed by demobilisation 21-24 October 2018 in Goulburn. Data are processed by Fugro (Adelaide) and provided to OEH Jan-Jun 2019. |
| Field | Value |
|---|---|
Limitations on public access |
|
| Field | Value |
|---|---|
Scope |
dataset |
| Field | Value |
|---|---|
Responsible party |
|
Contact position |
Data Broker |
Organisation name |
NSW Department of Climate Change, Energy, the Environment and Water |
Full postal address |
NSW Australia data.broker@environment.nsw.gov.au |
Telephone number |
131555 |
Email address |
|
Web address |
https://www.nsw.gov.au/departments-and-agencies/dcceew |
Responsible party role |
pointOfContact |
| Field | Value |
|---|---|
Metadata point of contact |
|
Contact position |
Data Broker |
Organisation name |
NSW Department of Climate Change, Energy, the Environment and Water |
Full postal address |
NSW Australia data.broker@environment.nsw.gov.au |
Telephone number |
131555 |
Email address |
|
Responsible party role |
distributor |
Metadata date |
2019-06-30 |
Metadata language |
eng |